MOVIFIT^® SC With Integrated Motor Switch

MOVIFIT^® SC connected to two helical gearmotors

MOVIFIT^® SC is generally implemented in systems which include electronics mounted close to the motor and in which simply switching the drive on and off is sufficient. The drive can be switched on using the soft start function.

Electronic, contactless motor starter for operation as
• Dual motor starter:
  Connection of two motors which can be controlled separately (1 direction of rotation)
• Reversing starter:
  Connection of one motor (2 directions of rotation)

Power range: Division into two power classes
• Power class 1:
  2 x 0.37 to 0.75 kW (dual motor starter)
  1 x 0.37 to 1.5 kW (reversing starter)
• Power class 2:
  2 x 1.1 to 2.2 kW (dual motor starter)
  1 x 2.2 to 4.0 kW (reversing starter)

The following integrated communication interfaces are available:
• PROFIBUS
• PROFINET
• DeviceNet

Digital inputs / outputs (depending on the fieldbus system and function level)
• PROFIBUS and DeviceNet (Classic function level): 6 DI + 2 DIO
• PROFIBUS and DeviceNet (Technology or System function level): 12 DI + 4 DIO
• PROFINET: 12 DI + 4 DIO

Other features of MOVIFIT^® SC:

• Voltage range: 3 x 380 – 500 V
• Increased safety by 3-phase switching
• Integrated energy distribution for line topology
• Integrated brake management SEW three-wire brakes (400 V / 500 V)
• Two control outputs for external brake control
• CAN / SBus interface for Technology or System function level
• Simple and fast parameter setting via DIP switches (easy mode)
• Expanded parameter setting via MOVITOOLS^® MotionStudio or fieldbus (expert mode)
• Degree of protection: IP65 (standard design), IP69K (Hygienic^Plus design)
• Soft startup time can be set via parameters
• Optional maintenance switch