SEW-Eurodrive has launched its new KES37 and RES37 stainless steel gear units. Based on the proven design of the existing
7-Series gear unit range, these two new additions feature casings and shafts made from stainless steel, with an inherently
suitable enclosure for washdown applications. The KES37 and RES37 models are ideally suited for aseptic applications where
caustic or high-pressure wash-downs are required, or where there is potential for product contamination.
According to SEW-Eurodrive Victorian Sales and Product Manager, Darren Klonowski, the stainless steel casings avoid the need
for special coatings, thereby ensuring a long service life and lower life-cycle costs. 'As all external components are fabricated
from stainless steel, there is also no requirement to paint the surface. This overcomes contamination problems from paint
flakes, and also avoids corrosion,' he said. 'This design is both acid- and alkali-resistant, which enables a wider variety
of detergents to be used for cleaning.'
Cleaning is further assisted by the smooth design of the casing, which prevents a build-up of contaminants. The lack of horizontal
surfaces in the design also permits better drainage, and facilitates wash-down of the units. Furthermore, the new units feature
up-rated seals that deliver a washdown protection rating, enabling these units to accommodate the most stringent hygienic
manufacturing requirements.
'SEW-Eurodrive has identified a clear industry requirement for reliable and efficient helical-bevel and helical gear units
for these demanding applications,' said Klonowski. 'The beauty of the KES37 and RES37 is that they benefit from proven SEW-Eurodrive
gear unit technology and are the only gear units of their type with such resilient casings, external parts and seals.'
Both the right-angle helical bevel KES37 and the in-line helical RES37 are rated up to 3kW and 200Nm. The KES37 is available
in a wide variety of configuration options and user-specific requirements, including hollow shaft, shrink disk, TorqLOC and
flange mounted design. The RES37 is available in a B5 flange-mounted design. Both models are available with a range of directly
mounted stainless steel motors up to 0.75kW, or alternatively a third-party motor can be fitted via available stainless steel
IEC adapters.
SEW-Eurodrive prides itself in being able to provide Australian industry with straightforward access to the country’s most
comprehensive selection of industrial gear-units.
For more information on this product, call your nearest office on 1300 SEW AUS (1300 739 287) or email us.
