Helical Gearmotor R SeriesParallel Shaft Helical Gearmotor F seriesHelical-bevel Gearmotor K SeriesHelical-worm Gearmotor S SeriesSpiroplan® Gearmotor W SeriesGear Units for Overhead Trolley Systems HW/HK/HS SeriesStainless Steel Gear UnitsVARIBLOC®, VARIMOT® Variable Speed GearmotorGeared Torque MotorAccessories / Options
AC Motor DRE/DRS/DRP/DRL SeriesAC Motor DT/DV SeriesAseptic Drives DAS SeriesEncoderAccessories and Options for Motors
MOVITRAC® BMOVITRAC® LTE-BMOVITRAC® LTP-B / LTX
MOVIDRIVE® B Drive InverterBus PositioningFlying SawCrane ControlElectronic CamModulo PositioningStorage / Retrieval SystemTable PositioningWinding CalculatorConstant Tension Central Winder
Standard GearmotorsMotorsMOVITRAC® Frequency InverterMOVIDRIVE® Drive InverterGear Units / Gearmotors
Low backlash Servo Gear Unit / Servo Gearmotor PSF/PSC/BSF SeriesReduced Backlash Standard Gear Units / Servo GearmotorSystem Solutions with Servo Gearmotors
Drives MOVIMOT® / MOVISWITCH®AS-interface Field Distributor / Fieldbus InterfacesMOVIGEAR® Mechatronic Drive SystemMOVIFIT® Field Controller for Innovative InstallationMOVIPRO® Decentralized Drive ControlMOVITRANS®
X Series: Helical and helical-bevel gear unit (up to 475 kNm)MC Series: Helical and helical-bevel gear units (up to 65 kNm)ML Series: Helical and helical-bevel gear units (up to 805 kNm)P..2 Series: Helical-bevel planetary gear units (gearmotors)P.MC Series: Helical-bevel planetary gear units (up to 359 kNm)Applications
MOVITOOLS MotionStudioElectronic Catalog & System Engineering / SEW WorkbenchIPOS® positioning and sequence controlEPLANSIMATIC STEP 7
MOVI-PLC® Control TechnologyMOVI-PLC® AdvancedMOVI-PLC® ApplicationSimple and flexible I/O
The MOVI-PLC® demonstrates its full strength in multi-axis applications. It communicates with connected inverters in the background, automatically
and optimized. The engineering for the entire machine takes place centrally in MOVITOOLS® MotionStudio.
Ready-to-use application modules, which the user can configure and set parameters for using graphical user interfaces, are
now available for numerous applications. This means that handling gantries, cranes, hoists or conveyor systems can be automated
easily and without knowledge of IEC 61131. When you use these application modules, MOVI-PLC® provides for exact control and coordination of all drives and other actuators involved in the application.
In addition to that, it goes without saying that libraries containing function modules for technology functions such as electronic
cam, synchronous operation, cam controller and virtual master axis as well as single-axis control according to PLCopen are
available. Prefabricated program templates are available for application fields such as flying saw, packaging machine, etc.
Although it was developed specifically for the areas of handling technology and pallatizers, 3D path interpolation can also
be used in forming processes such as plate bending. PTP, LIN and CIRC commands are available in different (or even moving)
coordination systems. Pre-fabricated program templates for different applications reduce the startup time dramatically.