Contact
 |
VU/VZ
series
|
|
The VU and VZ designs
of the VARIBLOC® wide V-belt
variable speed gearmotors are used with power ranges of up to 45 kW.
Typical speed setting ranges are 1:4, 1:6 and 1:8. The U- or Z-shaped
power flow and numerous combination possibilities with reduction
gear units mean that these speed gearmotors can be supplied in a
broad range of designs. They can easily be tailored to the most
diverse machine structures.
|
|
Technical data
|
||||
|
VARIBLOC®
|
Maximum motor power [kW]
|
Possible power flow
|
Maximum setting range for versions
|
|
|
Ventilated
|
Non-ventilated
|
|||
|
VU / VZ 01
|
0.75
|
U + Z
|
1 : 6
|
–
|
|
VU / VZ 11
|
1.5
|
U + Z
|
1 : 8
|
1 : 6
|
|
VU / VZ 21
|
3
|
U + Z
|
1 : 8
|
1 : 6
|
|
VU / VZ 31
|
5.5
|
U + Z
|
1 : 8
|
1 : 6
|
|
VU / VZ 41
|
11
|
U + Z
|
1 : 6
|
1 : 4
|
|
VU 51
|
22
|
U only
|
1 : 6
|
–
|
|
VU 6
|
45
|
U only
|
1 : 4
|
–
|
 |
D
series
|
|
Series D VARIMOT® friction disk variable speed gearmotors
are intended for power ranges up to 11 kW and speed setting ranges
1:4 or 1:5. The contact pressure between the driving pulley and
the friction ring required for torque transmission is set automatically.
The speed control can be adjusted even when the gearmotor is at
a standstill.
|
|
Technical data
|
||
|
VARIMOT®
|
Maximum
motor power [kW]
|
Maximum
setting range
|
|
D 16
|
1.1
|
1 : 5
|
|
D 26
|
2.2
|
1 : 5
|
| back to top |
